Ethernet Communication Module for FP-X FP-X FP-X0 FP0 FP0R FP2SH PLC

 

For Panasonic FP-XH, FP-X, FP- X0, FP0, FP0R, FP2SH Ethernet Communication Module

(The PLC in the pictures are NOT included.)

BCNet-FP is an economical Ethernet communications processor designed to meet the increasing demand for plant equipment (equipment network monitoring and production management) for Panasonic FP-XH, FP-X, FP- X0, FP0, FP0R, FP2SH and other series of PLC Ethernet data acquisition, very easy to build production management system.

BCNet-FP modular design, do not take up the PLC programming port, that is, programming software / PC software through the Ethernet PLC data monitoring at the same time, the touch screen can communicate with the PLC through the multiplex interface X2.

BCNet-FP function:

1, installed in the 35mm rail, no external power supply. COM1 interface with FP MD5 programming communication round mouth or communication terminal, COM2 expansion port for touch screen communication.

2, through the WEB server or configure the diagnostic tool BCDevice equipment can be set and run the diagnostic parameters.

3, automatically match the PLC and HMI serial parameters, no additional configuration.

4, support for Panasonic programming software FPWIN GR Ethernet communications, including program upload, download, compare, monitor.

5, support Panasonic ET-LAN Ethernet protocol communication, support PC software (configuration king, KepWare OPC server, etc.) access.

6, integrated ModbusTCP server, support FC1, FC2, FC3, FC5, FC6, FC16, Modbus data area automatically mapped to the FP data area.

7, support BCNetTCP / IP transparent protocol communication, support the host software (programming software FPWIN GR, Kingview, MCGS, force control, IFIX, INTOUCH, KepWare OPC server, etc.) access.

8, using ET-LAN communication protocol or transparent transmission protocol, can be high-level language (such as VB, VC, C #, etc.) programming, and Panasonic FP data communication, easy development of production management system.

9, support OPC channel SCADA (host configuration software) to OPC and FP communication.

10, can achieve FPWIN GR, ET-LAN, BCNetTCP transparent transmission protocol, ModbusTCP connection. Allowing six PC to collect PLC data at the same time, and the connection protocol is used arbitrarily.

11, support the user side through the Ethernet firmware update, a purchase, permanent upgrade.

Installation icon:

typical application:

Technical Parameters: