Inverter parameter settings Questions
Common drive in use, whether it can meet the requirements of the
transmission system, the drive parameter setting is very important, if
parameters are set incorrectly, can cause the drive does not work.
Common
drive, when general factory, manufacturers of each parameter has a
default value, these parameters are called factory values. In
the case of values of these parameters, the user can run the normal
mode of operation the panel, but the panel does not meet the operating
requirements of the majority of the transmission system. Therefore, users in the correct use of the drive, when you want to drive parameters from the following aspects:
(1) Check the motor parameters, set the drive power, current, voltage, speed, maximum frequency of the motor in the parameters, these parameters can be obtained directly from the motor nameplate.
(2) the drive to take control, which speed control, torque control, PID control or other means. After taking control, according to the general control accuracy, the need for static or dynamic identification.
(3) set the startup mode of the inverter, the inverter is generally set at the factory to start the panel, the user can select start-up mode according to the actual situation, you can use the panel, external terminals, and other types of communication from.
(4) to select a given signal, the drive frequency is generally given can also have a variety of ways, given the panel given externally, the external voltage or current reference, the communication mode, of course, the frequency of the drive to may be given one or more of these ways and in several ways. After setting the above parameters correctly, the drive can basically work, such as to obtain better control effect can only modify the parameters according to the actual situation.
parameter settings
(1) Check the motor parameters, set the drive power, current, voltage, speed, maximum frequency of the motor in the parameters, these parameters can be obtained directly from the motor nameplate.
(2) the drive to take control, which speed control, torque control, PID control or other means. After taking control, according to the general control accuracy, the need for static or dynamic identification.
(3) set the startup mode of the inverter, the inverter is generally set at the factory to start the panel, the user can select start-up mode according to the actual situation, you can use the panel, external terminals, and other types of communication from.
(4) to select a given signal, the drive frequency is generally given can also have a variety of ways, given the panel given externally, the external voltage or current reference, the communication mode, of course, the frequency of the drive to may be given one or more of these ways and in several ways. After setting the above parameters correctly, the drive can basically work, such as to obtain better control effect can only modify the parameters according to the actual situation.
评论
发表评论