(The PLC in the pictures are NOT included.)
Net-FX-S is used for PLC Ethernet data collection of Mitsubishi FX1S/1N/2N/3S/3G/3GA/3GC/3U/3UC series, Inovance, Shilin AX, Hechuan, Wecon, etc., which is very convenient for construction and production Management system. The module integrates WiFi function, supports AP mode, STA mode and AP+STA mode, which is very convenient to build a WiFi network, and PLC programming and data collection can be carried out directly through WiFi. BCNet-FX-S adopts industrial grade design, guide rail installation, with communication line. Without occupying the PLC programming port, while the host computer monitors the PLC data through the Ethernet, the touch screen can communicate with the PLC through the multiplex interface X2. BCNet-FX-S supports most of the SCADA software in the industrial control field, and supports Mitsubishi MC Ethernet protocol and ModbusTCP two communication methods.
Function
1. It is installed on a 35mm rail without external power supply. The COM1 port is connected to the FX's S8 programming communication port, and the COM2 expansion port is used for touch screen communication.
2. Parameter setting and running diagnosis can be performed on the equipment through WEB server or configuration diagnosis tool BCDevice.
3. Automatically adjust the baud rate of the FX programming communication port, which can meet the needs of large data communication.
4. Integrated WiFi function, supporting AP mode, STA mode and AP+STA mode.
5. PLC programming and data collection can be performed via WiFi.
6. Support Ethernet communication of MELSOFT products (GX Works2, GX Developer, etc.).
7. Support the host computer MC Ethernet protocol (MELSEC Communication Protocol) communication, support the host software (Kingview, MCGS, Force Control, IFIX, INTOUCH, KepWare OPC server, etc.) access.
8. Integrated ModbusTCP server, supports FC1, FC2, FC3, FC5, FC6, FC16, and the Modbus data area is automatically mapped to the FX data area.
9. Using MC communication protocol, high-level language (such as VB, VC, C#, etc.) programming can be realized, data communication with Mitsubishi FX can be realized, and the development of production management system is convenient.
10. SCADA (upper configuration software) supporting OPC channel communicates with FX in OPC mode.
11. MELSOFT connection, MC protocol connection, ModbusTCP connection can be realized at the same time, and the connection of 32 upper computers can be supported.
12. Support user side to realize firmware update through Ethernet, one-time purchase, permanent upgrade.
Typical application
Product number | BCNet-FX-S |
|---|
description | Mitsubishi FX series PLC Ethernet communication processor |
colour | Metallic black |
Status Display | Pwr, Com1, Com2, WiFi |
Ethernet interface Interface Type Output rate Protocol support TCP connections | Link/Active indicator, automatic polarity crossover RJ45 female socket 10/100Mbps MELSOFT, MC, ModbusTCP Max 32 |
WiFi interface Interface Type Transmit power Receiving sensitivity Wireless type Security Mechanism Protocol support Number of connections | 802.11 b/g/n 2.4G-2.5G External high gain antenna +26dBm(MAX,2.4G 802.11b/g/n) -89dBm (802.11b), -74dBm (802.11g), -72dBm (802.11n) Station/AP mode WPA-PSK/WPA2-PSK/WEP MELSOFT, MC, ModbusTCP Max 32 |
X1 interface (with PLC) Interface Type Transmission rate Protocol support | RS422 MD8 communication female port 9.6K, 19.2K, 38.4K, 57.6K, 115.2K FX programming port |
X2 interface (with HMI) Interface Type Output rate Protocol support | RS422 MD8 communication female port 9.6K, 19.2K, 38.4K, 57.6K, 115.2K FX programming port |
评论
发表评论