Ethernet or Wireless WiFi Communication Module for Xinje XC XD PLC

 

for Xinje XC XD PLC replace USB-XJ cable, Modbus TCP Gateway Kepware OPC

(The PLC in the pictures are NOT included.)

Features

1, installed on the 35mm rail, COM1 port directly connected to Xinje XC XD PLCs MD8 programming communication round mouth, and expand a COM2 port for touch screen communication. BCNet-XJ can be directly from the PLC programming communication port to obtain power, but also an external 24VDC power supply.

2, integrated WEB server, through the web page can set the device parameters and run the diagnosis, and set the login password to prevent tampering configuration data.

3, automatically match the PLC and HMI serial parameters, no additional configuration.

4, to achieve with Xinje programming software XCPPro Ethernet communication.

5, support Xinje Ethernet protocol communication, through the host computer system for the programmable controller for device data read / write, through the host computer software (Kingview, KepWare OPC server, etc.) select Delta Ethernet Driven, convenient and quick access.

6, integrated Modbus TCP server.

7, the specific BCNetTCP / IP protocol directly mapped to the computer serial port, support the host software (programming software FPWIN GR, Kingview, MCGS, power control, IFIX, INTOUCH, KepWare OPC server, etc.) convenient and quick access.

8, using Modbus TCP communication protocol or port mapping, can achieve high-level language (such as VB, VC, C #, etc.) programming, and Delta DVP data communication, easy development of production management system.

9, support OPC channel SCADA (host configuration software) to OPC and PLC communication.

10, can achieve WPLSoft, ISPSoft, BCNetTCP transparent transmission, ModbusTCP connection, allowing six PC at the same time to collect PLC data, and the connection protocol arbitrary use.

11, support the user side through the Ethernet to achieve firmware updates, free to provide more integrated firmware