Ethernet Module for Mitsubishi FX PLC Programming for FX3U-ENET-ADP

-

 

Ethernet Module for Mitsubishi FX PLC Programming for fx3u-enet-adp USB-SC09-FX, Modbus TCP FX1N 1S 2N 3S 3G 3GC 3U

Note：The  PLC in the pictures are NOT included.   Net-FX-S is optional WiFi model.

Net-FX Features:

Support Mitsubishi FX series PLC, such as FX1N, FX1S, FX2N, FX3G, FX3GC, FX3U, FX3UC, etc.
Two serial ports. X1 for PLC programming, X2 for HMI communiction, 
One RJ45 port X3. Support Mitsubishi TCP protocol and transparent transmission.
Integrated WEB server, through the web page can set the device parameters and run the diagnosis.
FX programming port baud rate auto adaptive.
Support ethernet communication in Mitsubishi software GX Developer or GX Works2.
Support communication with SCADAs by etherenet.
Built-in Modbus-TCP server.
Support advanced programing(VB,VC,C#)
Support OPC communication.
Max. 6 TCP/IP connection. 
Firmware upgrade through ethernet.
Ethernet-Module-for-Mitsubishi-FX-PLC-Programming-for-fx3u-enet-adp-USB-SC09-FX-Modbus-TCP-FX1N-1S-2N-3S-3G-3GC-3U-2251832794367608Ethernet-Module-for-Mitsubishi-FX-PLC-Programming-for-fx3u-enet-adp-USB-SC09-FX-Modbus-TCP-FX1N-1S-2N-3S-3G-3GC-3U-2251832794367608Ethernet-Module-for-Mitsubishi-FX-PLC-Programming-for-fx3u-enet-adp-USB-SC09-FX-Modbus-TCP-FX1N-1S-2N-3S-3G-3GC-3U-2251832794367608Ethernet-Module-for-Mitsubishi-FX-PLC-Programming-for-fx3u-enet-adp-USB-SC09-FX-Modbus-TCP-FX1N-1S-2N-3S-3G-3GC-3U-2251832794367608Ethernet-Module-for-Mitsubishi-FX-PLC-Programming-for-fx3u-enet-adp-USB-SC09-FX-Modbus-TCP-FX1N-1S-2N-3S-3G-3GC-3U-2251832794367608Ethernet-Module-for-Mitsubishi-FX-PLC-Programming-for-fx3u-enet-adp-USB-SC09-FX-Modbus-TCP-FX1N-1S-2N-3S-3G-3GC-3U-2251832794367608Ethernet-Module-for-Mitsubishi-FX-PLC-Programming-for-fx3u-enet-adp-USB-SC09-FX-Modbus-TCP-FX1N-1S-2N-3S-3G-3GC-3U-2251832794367608Ethernet-Module-for-Mitsubishi-FX-PLC-Programming-for-fx3u-enet-adp-USB-SC09-FX-Modbus-TCP-FX1N-1S-2N-3S-3G-3GC-3U-2251832794367608

评论

发表评论

此博客中的热门博文

RVNet-S7300 PPI MPI DP To Ethernet Gateway Protocol Converter Module

-
图片
  Programming and downloading on S7-200/300/400 For PLC RVNet-S7300 Basic: It is suitable for Ethernet communication between PLC control systems such as Siemens S7200/300/400 series and Siemens 840D and 840DSL CNC systems; its X2 expansion interface can be connected to touch screens (Siemens, PROFACE) and communication cables (Siemens original) that support multi-master communication. ). RVNet-S7300 Plus Straight-Forward It is suitable for Ethernet communication of PLC control systems such as Siemens S7200/300/400 series and Siemens 840D and 840DSL CNC systems; its X2 expansion interface can be connected to touch screens (Siemens, PROFACE) and communication cables (Siemens original) that support multi-master communication. ). RVNet-S7300 Plus Crossover It is suitable for Ethernet communication between PLC control systems such as Siemens S7200/300/400 series and Siemens 840D and 840DSL CNC systems; its X2 expansion interface supports Modbus function (supports Modbus master function...
More »

RVNet-S7300 PPI MPI DP To Ethernet Gateway Protocol Converter Module

-
图片
  Programming and downloading on S7-200/300/400 For PLC be updated.     ETH-MPI is Ethernet converter for S7-300 series, easy to use, is completely transparent to the user, without adding any program in the host computer and PLC, can use immediately after installed.   It convert PPI/MPI/DP protocol to TCP / IP protocol, so that it can realize long distance, high speed (up to a maximum of 1.5 m) communication and support various well-known host software (such as WinCC and Kingview, force control InTouch, kepserver Ex),   and can be simultaneously connected with STEP7 programming with Siemens S7-300.   Replace  SIEMENS Ethernet communication processor CP343-1 module completely, can replace the SIEMENS CP5611, CP5613, CP5512 communication card and SIEMENS Adapter PC programming adapter.   Support S7-200/300/400 PPI/MPI/DP protocol Support STEP7, WinCC in WinXP, Win7 32/64-bits Support SCADA, OPC communication. Support TIA portal platform, ...
More »

Ethernet Communication Module for Siemens S7-200 S7-300/400 PLC

-
图片
  Ethernet Communication Module for Siemens S7-200 S7-300/400 PLC 840d PPI MPI Profibus Gateway for HMI OPC Modbus TCP TIA Portal It is suitable for Ethernet communication of Siemens S7200/300/400 series PLC control system and Siemens 840D, 840D SL CNC system.  Replacement for CP343 and CP341, one module to solve multiple communication problems: Type A straight-forward: for SIEMENS or Proface HMI,  Type B crossover : for other 3rd HMI such as Winview,kinco,MCGS,etc. BCNet Functions 1.Programming and debugging The BCNet-S7 module supports programming and debugging of the PLC control system (MicroWIN, STEP7, TIA platform). 2.SCADA Ethernet communication The BCNet-S7 module supports Ethernet communication with almost all SCADA monitoring configuration software on the market, such as: WINCC, Kingview, MCGS, Force Control, Jiekong, Easy Control, INTOUCH, IFIX, LABVIEW, etc. 3.OPC communication The BCNet-S7 module supports Ethernet communication with the mainstream OPC Server ...
More »