Ethernet Communication Module for Mitsubishi A series PLC

-

 

Ethernet Communication Module for Mitsubishi A series PLC Programming Adapter replace USB-SC09, Modbus TCP Gateway KepWare OPC

(The  PLC in the pictures are NOT included,  V2.0 adapter includes two MD8 to DB25 cables.)

Features:
   1. Installed on the 35mm rail, the COM1 port is directly connected to the PLC programming communication port. BCNet-A requires an external 24VDC power supply.
    2, Integrated WEB server, through the web page can set device parameters and run diagnostics, and set the login protection password to prevent tampering with configuration data.
    3. Adaptation of Mitsubishi PLC programming port communication parameters, no additional settings are required.
    4. Integrated ModbusTCP server, supporting FC1, FC2, FC3, FC5, FC6, FC16, Modbus data area is automatically mapped to the data area of Mitsubishi PLC.
    5, using ModbusTCP mode, can achieve high-level language (such as VB, VC, C#, etc.) programming, to achieve data communication with Mitsubishi PLC, to facilitate the development of production management systems.
    6. SCADA (upper configuration software) supporting OPC channel communicates with Mitsubishi PLC in OPC mode.
    7. Support up to 6 PCs to collect PLC data at the same time.
    8. Support firmware update via Ethernet,
Ethernet-Communication-Module-for-Mitsubishi-A-series-PLC-Programming-Adapter-replace-USB-SC09-Modbus-TCP-Gateway-KepWare-OPC-2251832850772581Ethernet-Communication-Module-for-Mitsubishi-A-series-PLC-Programming-Adapter-replace-USB-SC09-Modbus-TCP-Gateway-KepWare-OPC-2251832850772581Ethernet-Communication-Module-for-Mitsubishi-A-series-PLC-Programming-Adapter-replace-USB-SC09-Modbus-TCP-Gateway-KepWare-OPC-2251832850772581

Ethernet-Communication-Module-for-Mitsubishi-A-series-PLC-Programming-Adapter-replace-USB-SC09-Modbus-TCP-Gateway-KepWare-OPC-2251832850772581

Typical application:

1.  SCADA Ethernet monitoring (Kingwang, MCGS, Force Control, WinCC, KepWare OPC), device networking.

   Ethernet-Communication-Module-for-Mitsubishi-A-series-PLC-Programming-Adapter-replace-USB-SC09-Modbus-TCP-Gateway-KepWare-OPC-2251832850772581

2. Support HMI software such as Kingview, MCGS, Force Control, WinCC, KepWare OPC to collect data in ModbusTCP mode. Take the ModScan32 test as an example.

(1) Run the ModScan32 software.

(2) Select the menu Connection/Connect, select Remote TCP/IP Server, enter the IP address of BCNet-A, and the service port is 502; click the [OK] button as shown.

Ethernet-Communication-Module-for-Mitsubishi-A-series-PLC-Programming-Adapter-replace-USB-SC09-Modbus-TCP-Gateway-KepWare-OPC-2251832850772581

 

(3) In the sub-window "ModSca1", set the Device ID to the station address of the PLC (such as 1), and select the function number 03:HOLDING REGISTER, Address = 20001, Length = 100.

(4) The sub-window data area displays the hexadecimal data of 420001 to 420100, which corresponds to the values of the registers D0 to D99 of the Mitsubishi A-series PLC, as shown in the figure.

Ethernet-Communication-Module-for-Mitsubishi-A-series-PLC-Programming-Adapter-replace-USB-SC09-Modbus-TCP-Gateway-KepWare-OPC-2251832850772581

 

(5) Double-click the data in the data area of the sub-window to modify the value.

 

Technical Parameters:

 

Ethernet-Communication-Module-for-Mitsubishi-A-series-PLC-Programming-Adapter-replace-USB-SC09-Modbus-TCP-Gateway-KepWare-OPC-2251832850772581

评论

发表评论

此博客中的热门博文

RVNet-S7300 PPI MPI DP To Ethernet Gateway Protocol Converter Module

-
图片
  Programming and downloading on S7-200/300/400 For PLC RVNet-S7300 Basic: It is suitable for Ethernet communication between PLC control systems such as Siemens S7200/300/400 series and Siemens 840D and 840DSL CNC systems; its X2 expansion interface can be connected to touch screens (Siemens, PROFACE) and communication cables (Siemens original) that support multi-master communication. ). RVNet-S7300 Plus Straight-Forward It is suitable for Ethernet communication of PLC control systems such as Siemens S7200/300/400 series and Siemens 840D and 840DSL CNC systems; its X2 expansion interface can be connected to touch screens (Siemens, PROFACE) and communication cables (Siemens original) that support multi-master communication. ). RVNet-S7300 Plus Crossover It is suitable for Ethernet communication between PLC control systems such as Siemens S7200/300/400 series and Siemens 840D and 840DSL CNC systems; its X2 expansion interface supports Modbus function (supports Modbus master function...
More »

RVNet-S7300 PPI MPI DP To Ethernet Gateway Protocol Converter Module

-
图片
  Programming and downloading on S7-200/300/400 For PLC be updated.     ETH-MPI is Ethernet converter for S7-300 series, easy to use, is completely transparent to the user, without adding any program in the host computer and PLC, can use immediately after installed.   It convert PPI/MPI/DP protocol to TCP / IP protocol, so that it can realize long distance, high speed (up to a maximum of 1.5 m) communication and support various well-known host software (such as WinCC and Kingview, force control InTouch, kepserver Ex),   and can be simultaneously connected with STEP7 programming with Siemens S7-300.   Replace  SIEMENS Ethernet communication processor CP343-1 module completely, can replace the SIEMENS CP5611, CP5613, CP5512 communication card and SIEMENS Adapter PC programming adapter.   Support S7-200/300/400 PPI/MPI/DP protocol Support STEP7, WinCC in WinXP, Win7 32/64-bits Support SCADA, OPC communication. Support TIA portal platform, ...
More »

Ethernet Communication Module for Siemens S7-200 S7-300/400 PLC

-
图片
  Ethernet Communication Module for Siemens S7-200 S7-300/400 PLC 840d PPI MPI Profibus Gateway for HMI OPC Modbus TCP TIA Portal It is suitable for Ethernet communication of Siemens S7200/300/400 series PLC control system and Siemens 840D, 840D SL CNC system.  Replacement for CP343 and CP341, one module to solve multiple communication problems: Type A straight-forward: for SIEMENS or Proface HMI,  Type B crossover : for other 3rd HMI such as Winview,kinco,MCGS,etc. BCNet Functions 1.Programming and debugging The BCNet-S7 module supports programming and debugging of the PLC control system (MicroWIN, STEP7, TIA platform). 2.SCADA Ethernet communication The BCNet-S7 module supports Ethernet communication with almost all SCADA monitoring configuration software on the market, such as: WINCC, Kingview, MCGS, Force Control, Jiekong, Easy Control, INTOUCH, IFIX, LABVIEW, etc. 3.OPC communication The BCNet-S7 module supports Ethernet communication with the mainstream OPC Server ...
More »